UTILIZATION OF BLUETOOTH CONNECTIONS FOR ARDUINO BASED DOOR LOCK SECURITY TOOLS

  • Hafdiarsya Saiyar (1*) Universitas Bina Sarana Informatika

    • (*) Corresponding Author
DOI: https://doi.org/10.34288/jri.v2i4.156

Keywords: Android, Arduino, Bluetooth, Motor Servo, Smartphone

Abstract

Home security is something that must be considered for every homeowner. Especially when you have to leave the house empty for work or even on vacation. You must be worried about thieves, lost jewelry, or the safety of other valuables. Therefore, the authors made a door lock security device by utilizing a Bluetooth connection with the Arduino Uno microcontroller. The research method used was direct observation of the selected object, namely the author's house, and conducting literature studies related to the Arduino Uno microcontroller. This door lock tool uses the Arduino Uno as a data processing center, because it is easy to use, and most importantly in the charging program, it does not require a download like a microcontroller in general. This Arduino Uno contains a special program that will give commands to the Servo Motor to open and open the door. Not only opening and opening doors, but this tool can also move the door without us holding or touching it but through a Smartphone. The purpose of this research is to produce a tool that can make it easier to manage or open doors using the Arduino via an Android smartphone using a Bluetooth connection.

Downloads

Download data is not yet available.

References

Handayani, Y. S., & Mardiana, Y. (2018). Kendali Robot Bluetooth Dengan Smartphone Android Berbasis Arduino Uno. ILKOM Jurnal Ilmiah, 10(3), 331–337. https://doi.org/10.33096/ilkom.v10i3.363.331-337

Handoko, P. (2017). SISTEM KENDALI PERANGKAT ELEKTRONIKA MONOLITIK BERBASIS ARDUINO UNO R3. Seminar Nasional Sains Dan Teknologi 2017, 1–11. https://jurnal.umj.ac.id/index.php/semnastek/article/view/2065

Handoko, P., Hermawan, H., & Nasucha, M. (2018). Pengembangan Sistem Kendali Alat Elektronika Menggunakan Mikrokontroler Arduino Uno R3 dan Ethernet Shield dengan Antarmuka Berbasis Android. Dinamika Rekayasa, 14(2), 92–103. https://doi.org/10.20884/1.dr.2018.14.2.191

Khalid, Z., Achmady, S., & Agustini, P. (2020). Otomatisasi Sistem Keamanan Kunci Lemari Menggunakan Sensor Sidik Jari Berbasis Arduino Uno. Jurnal TEKSAGRO, 1(1), 1–11. https://journal.lp2stm.or.id/index.php/TEKSAGRO/article/view/1

Nuryanto, N., & Widiyanto, A. (2016). RANCANG BANGUN MOBILE ROBOT 2WD DENGAN 2 SENSOR SRF05 UNTUK MENENTUKAN ARAH BELOKAN. Seminar Nasional Teknologi Informasi Dan Multimedia 2016, 1–5.

Setyawati, M. G., & Darmawan, A. (2019). Rancang Bangun Kunci Loker Masjid. Seminar Nasional Darmajaya. https://jurnal.darmajaya.ac.id/index.php/PSND/article/view/1947

Widcaksono, D., & Masyhadi, M. (2018). RANCANG BANGUN SECURED DOOR AUTOMATIC SYSTEM UNTUK KEAMANAN RUMAH MENGGUNAKAN SMS BERBASIS ARDUINO. JURNAL KAJIAN TEKNIK ELEKTRO, 3(1), 52–66. http://journal.uta45jakarta.ac.id/index.php/JKTE/article/view/1060

Widiyanto, A., & Nuryanto, N. (2016). Rancang Bangun Mobil Remote Control Android dengan Arduino. Creative Information Technology Journal, 3(1), 50–61. https://doi.org/10.24076/citec.2015v3i1.65

Winardi, S. (2016). RANCANG BANGUN SISTEM PENGAMAN PINTU RUMAH MENGGUNAKAN ANDROID BERBASIS ARDUINO UNO. E-NARODROID, 2(1). https://doi.org/10.31090/narodroid.v2i1.104

Yudhana, A., Sunardi, & Priyatno. (2018). Perancangan Pengaman Pintu Rumah Berbasis Sidik Jari Menggunakan Metode Uml. Jurnal Teknologi, 10(2), 131–138. https://doi.org/10.24853/jurtek.10.2.131-138

Published
2020-09-15
How to Cite
Saiyar, H. (2020). UTILIZATION OF BLUETOOTH CONNECTIONS FOR ARDUINO BASED DOOR LOCK SECURITY TOOLS. Jurnal Riset Informatika, 2(4), 213-218. https://doi.org/10.34288/jri.v2i4.156
Article Metrics

Abstract viewed = 224 times
PDF downloaded = 187 times
Issue
Vol 2 No 4 (2020): Period of September 2020
Section
Articles

Copyright (c) 2020 Hafdiarsya Saiyar

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

An author who publishes in the Jurnal Riset Informatika agrees to the following terms:

  • The author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-NonCommercial 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal
  • The author is permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).

Read more about the Creative Commons Attribution-NonCommercial  4.0 Licence here: https://creativecommons.org/licenses/by-nc/4.0/.